Simple Soft Starter 575V-12A

£1.00
Part Number:
STB 575V-12A

The STB soft starter is designed to smoothly start (and stop) 3 phase induction motors.

By employing a timed voltage ramp system (open loop control) you have greater control over soft-start and soft-stop performance reducing energy costs and enhancing the efficiency of your motor.

With a built-in bypass function and simple operation, the STB range from CD Automation offers a compact, cost effective solution to start and stop 3 phase AC motor control.

A soft starter is a device which controls the acceleration of an electric ac motor by means of controlling the applied voltage.

Without this control the interaction between the rotating magnetic field flux and the rotor winding flux will result in a high rotor current as torque is increased. By the time the motor reaches full speed, a current greater than the rated current will be drawn resulting in overheating and likely motor damage. To prevent this, a soft starter is needed.

Suitable for Squirrel Cage Motors the STB006 soft-starter works by gradually applying reduced voltage, essential in protecting the motor from overheating causing winding damage (AC Motors that start at full voltage can experience 5 to 9 times their nominal current).

Three adjustments can be made on the STB006 soft starter:

  • Initial start voltage (initial torque).
  • Soft start ramp time (ramp up).
  • Soft stop ramp time (ramp down).

No feedback is needed from the motor and Ramp-up and Starting (Initial) Torque is set by the operator from the STB’s front panel.

While soft starters operate continuously to control and protect the motor, the soft starter power section may be bypassed once the soft start is complete. This built-in bypass function provides greater operating efficiency and reduced heat in the enclosure (eliminating additional enclosure cooling).

In addition, the STB range has a kick start facility. The kick start allows the motor to draw greater current at start-up and create additional torque to break away a high friction load, useful in starting blocked pumps etc. This feature is user selectable between 100, 575 and 300mS.

More Information
Product NameSimple Soft Starter 575V-12A
Mains Supply
Mains voltage (L1, L2, L3) STB-006-2 3 x 208Vac to 240Vac max.
(+10% / -15%)
Mains voltage (L1, L2, L3)
STB-006-4
3 x 400Vac
to 480Vac max.
(+10% / -15%)
Mains frequency (at start) 47 Hz to 70 Hz
Rated insulation voltage 600 VAC
Control Input
Manual Start/Stop (terminal 4 and 5) 4 = ground 4 to 24Vac/dc
Automatic Start/Stop Auto start on power up
Output
Main contactor relay (terminals 1, 2, 3) NC, NO, C Max. 500mA, 125Vac
Operating
Operating maximum current 18A
Leakage current 10mA
Minimum working current 100mA
Starts per hour 20
Motor rating 240V 1.6 HP / 1.2kW
Motor rating 480V 3.2 HP / 2.3kW
Ramp time 2 to 20 seconds
Kick start at 70%
(set by dip switch)
0, 100, 200, 300mS
Initial torque 0 to 80%
Environmental
Degree of protection IP 20
Operating temperature 0°C to +40°C
Storage temperature -25°C to +70°C
Humidity 5% to 95% Rela-
tive Humidity
Standards Met
Electrical Safety Std. EN6097-1:2008
EN6097-4-3:2001
Generic Emission Std. EN6097-4-3:2000
Generic Immunity Std. EN6097-4-3:2000
Select Your AMP Range12A

111

CD Automation Cares

Every thyristor power controller product sold at CD Automation benefits our local and global environment. We believe the more you give in life, the more you will receive so we are eternally grateful to be able to pay-it-forward and share our platform to help causes that matter to all of us.

giving

discover

111

111

111