Solid State Relay - REVO-S 1PH 600V

£1.00
Part Number:
REVO-S 1PH 600V

Designed to replace contactors, REVO-S (RS1) is single phase (1PH) solid state relay (SSR) / thyristor power controller (SCR), suitable for loads up to 600Vac and available in 17 current ranges with a maximum of 800 amps.

Simplicity coupled with great functionaility, real benefits include:

+ Cost Effective, so the budget doesn't compromise performance.
+ Precision Power Control, with fast and complex firing types.
+ Space Saving Design, making panel space no longer an issue.
+ Clean Electricity, as no interference is produced when switching at zero volts.
+ Lower Maintenance Costs, with increased heater element lifespan.
+ Built to Last, with an expected lifespan of over 10 years.

Firing Range
Zero Cross (SC), Burst Firing (BF)
Communication
None
Option
Heater Break Alarm
Ideal For
Normal Resistance, Medium & Long Wave Infrared load types

DOCUMENTATION NOTE: To view and download datasheets / manuals please select the Amp Size required first via the dropdown box above.

REVO-S 1PH is a compact & low cost unit mounted on CD Automation designed heat-sinks, optimised for maximum heat dissipation. Integral quick-blow fuse & holder can be supplied on unit sizes 30A to 40A units as an option, with internal fixed fuses on 60A upwards as standard. 

The REVO-S thyristor unit also has the option of 4-20mA or 0-10Vdc linear input with Burst Firing set for 4, 8 or 16 cycles. Heater break alarm available as an option.

  • Thyristor suitable for resistive, medium or long wave infrared and heater battery loads
  • Current sizes available - 30A, 35A, 40A, 60A, 90A, 120A, 150A, 180A, 210A, 280A, 400A, 450A, 500A, 600A, 700A, 800A
  • Supply voltage up to 690Vac
  • Fully isolated from the power
  • Zero crossing firing mode (ZC) or Burst Firing (4, 8 or 16 cycles selectable)
  • Logic input signal 4 to 30V DC typical (SSR) plus 4-20mA or 0-10V DC Linear input as an option
  • Constant current drain, independent of supply voltage with SSR input
  • Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication. Available as an option
  • Side by side mounting
  • Special design Heatsink with high dissipation value
  • IP20 protection
  • Complies with CE and cUL specification
  • Can be used in conjunction with REVO-PC to provide multi-zone control
More Information
Product NameSolid State Relay - REVO-S 1PH 600V
SoftwareNo
Firing RangeZero Cross (SC), Burst Firing (BF)
Input Signal

DC logic (SSR), 4-20mA, 0-10Vdc

CommunicationNone
Feedback TypeOpen loop
Option Heater Break Alarm
Ideal ForNormal Resistance, Medium & Long Wave Infrared load types
ApprovalscUL and CE + EMC approved
AltitudeOver 1000m of altitude reduce the nominal current of 2% for each 100m.
Auxiliary Voltage Supply

90:130Vac 8VA Max
170:265Vac 8VA Max (Standard with phase to neutral)
230:345Vac 8VA Max
300:530Vac 8VA Max (Standard with phase to phase)
510:690Vac 8VA Max

Controlled Phases1
Heater Break AlarmTo diagnose partial or total load failure with automatic setup, relay alarm output and LED indication, available as an option
HumidityFrom 5 to 95% but without condensation or surface ice
MountingDIN-rail, screw mounting
Load TypeSingle Phase (Phase to Phase or Phase to Neutral) normal resistance
Panel SealingNo
Storage Temperature -25 °C to 50 °C Max
Voltage Power SupplyFrom 24V to 600Vac (690V available as option on specific models)
Voltage FrequencyAutomatically from 47 to 70 Hz