REVO-Connect further enhances CD Automation’s range of thyristor (SCR) power controllers. REVO-C is ideal for all load types including resistance or inductive loads that require control up to 2100 amps (typically 1300kW at 3 phase 415Vac).
Perfect for complex load types where there is a need for phase angle firing. These include transformer coupled loads, fast responding loads, loads with large resistance changes and loads requiring current limiting or soft-start.
Integral feedback control regulates the power to the heating element by monitoring the line supply voltage and compensating for any fluctuations. It is a way to linearise the output power by comparing it with the input for individual phases, providing true power control, load balance monitoring, and missing or incorrect phase rotation diagnostics.
When you start up a silicon carbide heating element for example, the initial resistance is so low that it acts almost as a short circuit, causing a huge inrush current. Typically, this would be seven or eight times the nominal current, but could be as high as 15 times.
As the temperature rises to about 500 degrees centigrade for optimal operation, the resistance of the element also increases. We are only talking about 250 milliseconds, but in that time you can do a lot of damage with high inrush current into complex heating elements such as silicon carbide or Kanthal.
With the feedback feature on REVO-Connect you can monitor the temperature at start-up and then switch to voltage control once the required operating temperature has been reached. At this point the unit automatically increases the voltage to maintain the required power.
When using silicon carbide for example, the resistance increases with age, which affects the power output. This is because, as the elements age, their resistance increases. This results in decreasing current. So after say a year, the transformer voltage would need to be adjusted by changing the taps. This results in the resistance of the heater staying at the same level. This has traditionally been provided by two or three taps on the transformer. Feedback goes some way to replace multi-tap.
Sitting at the top of the CD Automation range, there is no load that the REVO-C can’t handle.
The keypad and display allow total flexibility for the user with full configuration of the process and digital inputs, firing and control modes, to suit the application.
With the Smartphone APP you can also locally review settings and monitor alarms with the control cabinet door closed. If you need expert advice, you can quickly upload critical data within minutes and send via email to our engineers. They will provide helpful suggestions, giving you protection from anywhere in the world.
REVO-C is an intelligent family of thyristor (SCR) power controllers available in single and 3 phase types. Delivering breakthrough thermal performance and extended heater life, REVO-C now comes with smartphone connectivity. Ask for a no-obligation quotation with our 10 min quick quote service emailing email@example.com, or call 01323 811100.