Solid State Relay - REVO-S 1PH 600V-600A

£1.00
Part Number:
REVO-S 1PH 600V-600A

Designed to replace contactors, REVO-S (RS1600-6) is single phase (1PH) solid state relay (SSR) / thyristor power controller (SCR), suitable for loads up to 600Vac and a maximum current rating of 600 amps.

Simplicity coupled with great functionaility, real benefits include:

+ Cost Effective, so the budget doesn't compromise performance.
+ Precision Power Control, with fast and complex firing types.
+ Space Saving Design, making panel space no longer an issue.
+ Clean Electricity, as no interference is produced when switching at zero volts.
+ Lower Maintenance Costs, with increased heater element lifespan.
+ Built to Last, with an expected lifespan of over 10 years.

Firing Range
Zero Cross (SC), Burst Firing (BF)
Communication
None
Option
Heater Break Alarm
Ideal For
Normal Resistance, Medium & Long Wave Infrared load types
  • Resistance Load: Normal Resistance
  • Current Range: 30A, 40A, 60A, 90A, 120A, 150A, 180A, 210A, 280A, 400A, 500A, 600A, 700A
  • Supply Voltage: 24Vac, 480Vac or 600Vac
  • Input Signal: SSR, 0:10Vdc, 4:20mA
  • Firing Types: Zero Cross or Bust Firing (4, 8 or 16 cycles selectable)
  • Options: Heater Break Alarm - To notify you about load failures
  • Protection: IP20, complies with CE & cUL specification
  • Extras: Internal Quick Blow Fuses, Specialised Heat Sink Design
More Information
Product NameSolid State Relay - REVO-S 1PH 600V-600A
SoftwareNo
Firing RangeZero Cross (SC), Burst Firing (BF)
Input Signal

DC logic (SSR), 4-20mA, 0-10Vdc

CommunicationNone
Feedback TypeOpen loop
Option Heater Break Alarm
Ideal ForNormal Resistance, Medium & Long Wave Infrared load types
ApprovalscUL and CE + EMC approved
AltitudeOver 1000m of altitude reduce the nominal current of 2% for each 100m.
Auxiliary Voltage Supply

90:130Vac 8VA Max
170:265Vac 8VA Max (Standard)
230:345Vac 8VA Max
300:530Vac 8VA Max (Standard)
510:690Vac 8VA Max

Controlled Phases1
Heater Break AlarmTo diagnose partial or total load failure with automatic setup, relay alarm output and LED indication, available as an option
HumidityFrom 5 to 95% but without condensation or surface ice
MountingScrew mounting
Load TypeSingle Phase (Phase to Phase or Phase to Neutral)
Panel SealingIP20
Storage Temperature -25 °C to 50 °C Max
Voltage Power SupplyFrom 24V to 600Vac (690V available as option on specific models)
Voltage FrequencyAutomatically from 47 to 70 Hz

111

CD Automation Cares

Every thyristor power controller product sold at CD Automation benefits our local and global environment. We believe the more you give in life, the more you will receive so we are eternally grateful to be able to pay-it-forward and share our platform to help causes that matter to all of us.

giving

discover

111

111

111