Solid State Relay - REVO-S 1PH 690V-300A
Designed to replace contactors, REVO-S (RS1300-7) is single phase (1PH) solid state relay (SSR) / thyristor power controller (SCR), suitable for loads up to 690Vac and a maximum current rating of 300 amps.
Simplicity coupled with great functionaility, real benefits include:
+ Cost Effective, so the budget doesn't compromise performance.
+ Precision Power Control, with fast and complex firing types.
+ Space Saving Design, making panel space no longer an issue.
+ Clean Electricity, as no interference is produced when switching at zero volts.
+ Lower Maintenance Costs, with increased heater element lifespan.
+ Built to Last, with an expected lifespan of over 10 years.

- Resistance Load: Normal Resistance
- Current Range: 30A, 40A, 60A, 90A, 120A, 150A, 180A, 210A, 280A, 400A, 500A, 600A, 700A
- Supply Voltage: 24Vac, 480Vac or 600Vac
- Input Signal: SSR, 0:10Vdc, 4:20mA
- Firing Types: Zero Cross or Bust Firing (4, 8 or 16 cycles selectable)
- Options: Heater Break Alarm - To notify you about load failures
- Protection: IP20, complies with CE & cUL specification
- Extras: Internal Quick Blow Fuses, Specialised Heat Sink Design
Product Name | Solid State Relay - REVO-S 1PH 690V-300A |
---|---|
Software | No |
Firing Range | Zero Cross (SC), Burst Firing (BF) |
Input Signal | DC logic (SSR), 4-20mA, 0-10Vdc |
Communication | None |
Feedback Type | Open loop |
Option | Heater Break Alarm |
Ideal For | Normal Resistance, Medium & Long Wave Infrared load types |
Approvals | cUL and CE + EMC approved |
Altitude | Over 1000m of altitude reduce the nominal current of 2% for each 100m. |
Auxiliary Voltage Supply | 90:130Vac 8VA Max |
Controlled Phases | 1 |
Heater Break Alarm | To diagnose partial or total load failure with automatic setup, relay alarm output and LED indication, available as an option |
Humidity | From 5 to 95% but without condensation or surface ice |
Mounting | Screw mounting |
Load Type | Single Phase (Phase to Phase or Phase to Neutral) |
Panel Sealing | IP20 |
Storage Temperature | -25 °C to 50 °C Max |
Voltage Power Supply | From 24V to 690Vac |
Voltage Frequency | Automatically from 47 to 70 Hz |