Solid State Relay - REVO-S 1PH 690V-90A

£1.00
Part Number:
REVO-S 1PH 690V-90A

Designed to replace contactors, REVO-S (RS1090-7) is single phase (1PH) solid state relay (SSR) / thyristor power controller (SCR), suitable for loads up to 690Vac and a maximum current rating of 90 amps.

Simplicity coupled with great functionaility, real benefits include:

+ Cost Effective, so the budget doesn't compromise performance.
+ Precision Power Control, with fast and complex firing types.
+ Space Saving Design, making panel space no longer an issue.
+ Clean Electricity, as no interference is produced when switching at zero volts.
+ Lower Maintenance Costs, with increased heater element lifespan.
+ Built to Last, with an expected lifespan of over 10 years.

Firing Range
Zero Cross (SC), Burst Firing (BF)
Communication
None
Option
Heater Break Alarm
Ideal For
Normal Resistance, Medium & Long Wave Infrared load types
  • Resistance Load: Normal Resistance
  • Current Range: 30A, 40A, 60A, 90A, 120A, 150A, 180A, 210A, 280A, 400A, 500A, 600A, 700A
  • Supply Voltage: 24Vac, 480Vac or 600Vac
  • Input Signal: SSR, 0:10Vdc, 4:20mA
  • Firing Types: Zero Cross or Bust Firing (4, 8 or 16 cycles selectable)
  • Options: Heater Break Alarm - To notify you about load failures
  • Protection: IP20, complies with CE & cUL specification
  • Extras: Internal Quick Blow Fuses, Specialised Heat Sink Design
More Information
Product NameSolid State Relay - REVO-S 1PH 690V-90A
SoftwareNo
Firing RangeZero Cross (SC), Burst Firing (BF)
Input Signal

DC logic (SSR), 4-20mA, 0-10Vdc

CommunicationNone
Feedback TypeOpen loop
Option Heater Break Alarm
Ideal ForNormal Resistance, Medium & Long Wave Infrared load types
ApprovalscUL and CE + EMC approved
AltitudeOver 1000m of altitude reduce the nominal current of 2% for each 100m.
Auxiliary Voltage Supply

90:130Vac 8VA Max
170:265Vac 8VA Max (Standard)
230:345Vac 8VA Max
300:530Vac 8VA Max (Standard)
510:690Vac 8VA Max

Controlled Phases1
Heater Break AlarmTo diagnose partial or total load failure with automatic setup, relay alarm output and LED indication, available as an option
HumidityFrom 5 to 95% but without condensation or surface ice
MountingScrew mounting
Load TypeSingle Phase (Phase to Phase or Phase to Neutral)
Panel SealingIP20
Storage Temperature -25 °C to 50 °C Max
Voltage Power SupplyFrom 24V to 690Vac
Voltage FrequencyAutomatically from 47 to 70 Hz