Thyristor Power Controller - Multidrive 1PH
Universal thyristor power controller suitable for all load types. Now superseded by REVO-C 1PH power controller range.
Available in 8 Amp sizes from 850A to 2700A the Multidrive provides the user with optimum control of the process and ease of set-up & maintenance.
The Front panel keypad & display allows total flexibility for the user with full configuration of the process & digital inputs types and firing & control modes, to suit the application.
Real time values such as the Voltage, Current & Power can be read from the display. Internal quick-blow fuses as standard provide complete protection for the thyristor. Additional features such as current limit, profiling, heater break alarm and RS485 comms come as standard.
|Product Name||Thyristor Power Controller - Multidrive 1PH|
|Current Range All Others||1100A, 1400A, 1600A, 1800A, 2100A|
|Firing Range||Burst Firing (BF), Single Cycle (SC), Phase Angle (PA), Soft Start (SS), Delayed Triggering (DT)|
4-20mA, 0-10Vdc, 10K Pot, RS485 Comms
|Communication||RS485 Modbus as standard, Profibus DP, Profinet, Ethernet IP as option|
|Feedback Type||Voltage (V), Power (VxI), Current (I), External|
|Option||Current Limit, Soft Start, Re-transmission Signal, Heater Break Alarm as standard|
|Ideal For||All load types|
|Approvals||CE + EMC approved|
|Altitude||Over 1000 m of altitude reduce the nominal current of 2% for each 100m|
|Auxiliary Voltage Supply||
90:130Vac 8VA Max
|Heater Break Alarm||To diagnose partial or total load failure with automatic setup, relay alarm output and LED indication, available as an option|
|Humidity||From 5 to 95% but without condensation or the effects of ice|
|Load Type||Single Phase (Phase to Phase, or Phase to Neutral)|
|Storage Temperature||-25 °C to 50 °C Max|
|Voltage Power Supply||From 24V to 480V (Std) or 600V & 690V as option|
|Voltage Frequency||Automatically from 47 to 70 Hz|