Solid State Relay - REVO-S 2PH 600V
Designed to replace contactors, REVO-S (RS2) is a two leg switching of three phase (2PH) solid state relay (SSR), suitable for loads up to 600Vac in delta or star configuration without neutral (3 wire) and available in 17 current ranges with a maximum of 800 amps.
Simplicity coupled with great functionaility, real benefits include:
+ Cost Effective, so the budget doesn't compromise performance.
+ Precision Power Control, with fast and complex firing types.
+ Space Saving Design, making panel space no longer an issue.
+ Clean Electricity, as no interference is produced when switching at zero volts.
+ Lower Maintenance Costs, with increased heater element lifespan.
+ Built to Last, with an expected lifespan of over 10 years.
DOCUMENTATION NOTE: To view and download datasheets / manuals please select the Amp Size required first via the dropdown box above.
REVO-S 2PH is a compact & low cost unit mounted on CD Automation designed heat-sinks, optimised for maximum heat dissipation. Integral quick-blow fuse & holder can be supplied on unit sizes 30A to 40A units as an option, with internal fixed fuses on 60A upwards as standard. The REVO-S thyristor unit also has the option of 4-20mA or 0-10Vdc linear input with Burst Firing set for 4, 8 or 16 cycles.
- Thyristor power controller suitable for resistive, medium or long wave infrared and heater battery loads
- Current sizes available - 30A, 35A, 40A, 60A, 90A, 120A, 150A, 180A, 210A, 280A, 400A, 450A, 500A, 600A, 700A, 800A
- Supply voltage up to 600Vac (690Vac as an option)
- Fully isolated from the power
- Zero crossing firing mode (ZC) or Burst Firing (4, 8 or 16 cycles selectable)
- Logic input signal 4 to 30V DC typical (SSR) plus 4-20mA or 0-10V DC Linear input as an option
- Constant current drain, independent of supply voltage with SSR input
- Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication. Available as an option
- Side by side mounting
- Special design Heatsink with high dissipation value
- IP20 protection
- Complies with CE and cUL specification
- Can be used in conjunction with REVO-PC to provide multi-zone control
| Product Name | Solid State Relay - REVO-S 2PH 600V |
|---|---|
| Software | No |
| Firing Range | Zero Cross (SC), Burst Firing (BF) |
| Input Signal | DC logic (SSR), 4-20mA, 0-10Vdc |
| Communication | None |
| Feedback Type | Open loop |
| Option | Heater Break Alarm |
| Ideal For | Normal Resistance, Medium & Long Wave Infrared load types |
| Approvals | cUL and CE + EMC approved |
| Altitude | Over 1000m of altitude reduce the nominal current of 2% for each 100m. |
| Auxiliary Voltage Supply | 12:24Vac/dc (30A to 210A only with DC Linear input or HBA), otherwise available as follows: 90:130Vac 8VA Max |
| Controlled Phases | 2 |
| Heater Break Alarm | To diagnose partial or total load failure with automatic setup, relay alarm output and LED indication, available as an option |
| Humidity | From 5 to 95% but without condensation or surface ice |
| Mounting | DIN-rail, screw mounting |
| Load Type | 3 Phase (3 wire - no neutral) |
| Panel Sealing | No |
| Storage Temperature | -25 °C to 50 °C Max |
| Voltage Power Supply | From 24V to 600Vac (690V available as option on specific models) |
| Voltage Frequency | Automatically from 47 to 70 Hz |