Thyristor Power Controller - REVO-M 1PH
Universal thyristor (SCR) power controller (RM1) with RS485 comms and front panel display as standard. Now superseded by REVO-C 1PH.
REVO-M provides the user total flexibility with the ability to select any input, firing & feedback type. Either via the front panel display & keypad, or via the RS485 comms port the user has opportunity to change or view any parameter
REVO-M SCR from CD Automation is a single phase burst fire power controller & phase control thyristor ideal for normal & variable resistive type loads.
Selection is made either via the front panel display & keypad, or via the RS485 comms port and/or configuration software.
The operator has the opportunity to change or view any parameter in the thyristor, as well as monitoring process values such as the Voltage, Current & Power.
Choice of inputs from DC Logic (Solid state relay), 4-20mA, 0-10Vdc and RS485 comms and firing types such as Burst Firing (for Burst fire power controller), Single Cycle & Phase Angle firing (Phase control thyristors) as standard. Internal quick-blow semiconductor fuses provide complete protection for the thyristor power regulator. Heater break alarm available as an option.
|Product Name||Thyristor Power Controller - REVO-M 1PH|
|Current Range All Others||35A, 40A, 60A, 90A, 120A, 150A, 180A, 210A, 300A, 400A, 500A, 600A, 700A|
Thyristor Configurator Software. Version V18.104.22.168. 23.7MB download file size.
|Firing Range||Zero Cross (ZC), Burst Firing (BF), Single Cycle (SC), Phase Angle (PA), Soft Start (SS), Delayed Triggering (DT)|
DC logic (SSR), 4-20mA, 0-10Vdc, 10K Pot, RS485 Comms
|Communication||RS485 Modbus as standard, Profibus DP, Profinet, Ethernet IP as option|
|Feedback Type||Voltage (V), Power (VxI)|
|Option||Heater Break Alarm|
|Ideal For||Normal Resistance, Short, Medium & Long Wave IR, and Silicon Carbide load types|
|Approvals||CE + EMC approved|
|Altitude||Over 1000m of altitude reduce the nominal current of 2% for each 100m|
|Auxiliary Voltage Supply|
90:130Vac 8VA Max
|Heater Break Alarm||To diagnose partial or total load failure with automatic setup, relay alarm output and LED indication, available as an option|
|Humidity||From 5 to 95% but without condensation or the effects of ice|
|Mounting||DIN-Rail or Screw mounting|
|Load Type||Single Phase (Phase to Phase, or Phase to Neutral)|
|Storage Temperature||-25 °C to 50 °C Max|
|Voltage Power Supply||From 24V to 480V (Std) or 600V & 690V as option on specific models|
|Voltage Frequency||Automatically from 47 to 70 Hz|